siguenos en

Instrumentación Analítica para Laboratorio


Productos


Comercialización, asesoramiento y servicio técnico de equipamiento de análisis y laboratorio


Incubación de muestras

Incubadores de CO2

Incubadoires multigas

Cámaras climáticas

Incubadores refrigerados

Agitadores orbitales


Utilizamos cookies propias y de terceros para mejorar nuestros servicios. Puede cambiar la configuración u obtener más información aquí.

Acepto las cookies de este sitio.

Módulo IVF para INCOmed
When it comes to successful in vitro fertilisation, precision and reliability of CO2 incubators are of utmost importance. Even minimal discrepancies in CO2 and O2 concentration, temperature or humidity can influence the development of the cell culture. To keep the recovery times of the INCO108med incubator to a minimum, Memmert has developed an IVF module with separate slide-in units for the Petri dishes. The Memmert CO2 incubator INCOmed is classified as a class IIa medical device and complies with the basic safety requirements as stipulated in the European Medical Device Directive (93/42/EEC).
  • temperature range up to +50 °C
  • 1 model size (108 litres volume)
  • cultivation in 8 separate slide-in units: only one slide-unit can be opened at a time: quick recovery times due to minimum air exchange
  • active humidity control: minimum vaporisation in the chamber interior, no condensation, no cultivation with oil required
  • the interior including all installations and sensors can be sterilised at 160 °C in a 4-hour programme
Incubadora CO2 INCOmed
Especially for in-vitro fertilization, the precision and reliability of the CO2 incubator are of crucial importance, as the slightest deviation in the CO2 atmosphere, temperature or humidity content during cultivation can already affect cell development. For this reason, Memmert has subjected its CO2 incubator INCOmed to a comprehensive evaluation process for its recognition as a medical device. Each Memmert CO2 incubator INCOmed is classified as class IIa medical device.
  • temperature range up to +50 °C
  • 3 model sizes (108 to 246 litres volume)
  • the standard INCOmed appliance can be expanded with 8 additional modules
  • state-of-the-art control technology
  • humidity limit control integrated as standard (optional: active humidity control system)
  • the inner chamber, including all fittings and all sensors, can be sterilised at +160 °C in a 4 hour programme Save & Close 
Incubadora Refrigerada Peltier IPP
Excellent controllability, extremely small control fluctuations, low-vibration operation and impressive energy savings provide the added value from this perfect adaptation of Peltier technology. With its extensive range of appliances with Peltier elements for heating and cooling – such as the IPP Peltier-cooled incubator, the HPP constant climate chamber, the IPS cooled storage incubator and the Peltier-cooling unit for waterbaths – Memmert is the market leader in this technologically sophisticated segment.
  • temperature range 0°C up to +70 °C
  • 5 model sizes (32 to 749 litres volume)
  • 2 model variants: SingleDISPLAY and TwinDISPLAY
  • double doors standard for all models: Prevention of contamination and drops in temperature, and at the same time an optimum view of the sensitive load through wide-area interior glass doors
  • fans integrated in the Peltier elements ensure rapid energy transfer and optimum temperature distribution
Incubadora Refrigerada por Compresor ICP
Our ICP compressor-cooled incubator offers great results whenever a rapid and precise changeover between heating and cooling phases in ramp operation is required. Due to the finely tuned control technology, temperatures exactly reach the setpoint values without the need for energy-intensive bursts of power.
  • temperature range up to +60 °C
  • 5 model sizes (53 to 749 litres volume)
  • 1 model variant: TwinDISPLAY
  • double doors standard for all models: Prevention of contamination and drops in temperature, and at the same time an optimum view of the sensitive load through wide-area interior glass doors
  • very good air circulation in the working chamber through sophisticated ventilation technology
  • intelligent defrosting function
Incubadora Refrigerada IPS
Why optimise the performance of a cooled incubator unnecessarily for rapid changes in temperature? The IPS cooled storage incubator exactly meets the requirements of the food or cosmetics industry, medicine, pharmaceutics for storing samples at constant temperatures: absolute reliability, precision and durability, and particularly environmentally friendly at the same time.
  • temperature range +14 °C to +45 °C
  • 2 model sizes (256 and 749 litres volume)
  • 1 model variant: SingleDISPLAY
  • double doors as standard: prevention of contamination and drops in temperature, and at the same time an optimal view of the load through fully glazed interior doors
  • fans integrated in the Peltier elements ensure rapid energy transport and optimal temperature distribution
Incubadora I
In the laboratory, the Memmert incubator I is ideal for all applications with temperatures up to +80°C – specifically for incubating living cultures at +37 °C. Thanks to the finely-tuned control technology, critical temperature overshoots are completely ruled out, valuable loads are therefore warmed up particularly carefully in this highly precise microbiological incubator.
  • temperature range up to +80 °C
  • 8 model sizes (32 to 749 litres volume)
  • 2 model variants: SingleDISPLAY and TwinDISPLAY
  • natural convection or forced air circulation N/F
  • double doors (interior glass, exterior stainless steel) for a clear view without a drop in temperature
  • activation of sterilisation routine via ControlCOCKPIT (TwinDISPLAY)
Incubadora CO2 ICO
Those who can control the temperature with the highest precision can also redefine precision time and time again. The control system of the Memmert CO2 incubator ICO is so finely tuned that the appliance reaches the setpoint temperature very quickly and without temperature overshoots. Alarm notifications to your mobile phone guarantee the safety of the chamber load, and the battery-buffered ControlCOCKPIT ensures continuous CO2 control even when there is a power failure. Ideal hygiene is a given too: rounded edges enable easy and thorough cleaning, the interior can be sterilised within 60 minutes at 180 °C.
  • Temperature range up to +50 °C
  • 4 model sizes (with a chamber volume of 56 to 241 litres)
  • Fail-safe, FDA-compliant logging of temperature, CO2, O2 humidity, open door time data
  • Battery-buffered ControlCOCKPIT: The operating display, logging and CO2 control are fully functional even during a power failure
  • Visual and acoustic alarm as well as alarm notification to mobile phones if the individually adjustable temperature, CO2, O2, or humidity ranges are exceeded
  • Active humidity control
  • The interior chamber, including all installations and sensors, can be sterilised at +180 °C in a 60-minute programme
Agitadores orbitales
Incubadores refrigerados
Cámaras climáticas

 alt=

 alt=

Unidad de Negocio de Analítica


La Unidad de Negocio de Analítica se centra en el asesoramiento, la venta y el mantenimiento de laboratorios, en campos tan diversos como medio ambiente, control de calidad, biotecnológico, bioinvestigación, nanotecnología, alimentación o farmacéutico

 

En 1.986 se inició lo que hoy en día es la Unidad de Negocio de Analítica de Inycom. Se trata de un área de actividad que se centra en el asesoramiento, la venta y el mantenimiento de laboratorios, en campos tan diversos como medio ambiente, control de calidad, biotecnológico, bioinvestigación, nanotecnología, alimentación o farmacéutico.

 

Nuestro equipo, formado por profesionales especializados y cualificados para dar soporte a cada uno de nuestros clientes, unido a un equipamiento tecnológicamente de los más avanzados en el sector, nos convierte en empresa de referencia en el sector de la instrumentación para laboratorio.

 

Capacidades I+D

Automatización de ensayos de laboratorios de análisis:

  • Integración de equipos,
  • Desarrollo de software de análisis y registro,
  • Trazabilidad,
  • Control y parametrización de medidas
  • Labview, Python/scypy, etc.

Desarrollo e integración de aplicaciones específicas de técnicas analíticas.

 

Contacto


Esta dirección de correo electrónico está protegida contra spambots. Usted necesita tener Javascript activado para poder verla.

SEDE CENTRAL
Plataforma logística
(Pla-Za). C/Alaún, 8
50197 Zaragoza (Spain)
Tel +34 902 995 820

Utilizamos cookies propias y de terceros para mejorar nuestros servicios. Puede cambiar la configuración u obtener más información aquí.

Acepto las cookies de este sitio.